4.331 Inch | 110 Millimeter x 6.693 Inch | 170 Millimeter x 1.102 Inch | 28 Millimeter TIMKEN 2MM9122WI SUH Precision Ball Bearings

Welcome to 4.331 Inch | 110 Millimeter x 6.693 Inch | 170 Millimeter x 1.102 Inch | 28 Millimeter the 4.331 Inch | 110 Millimeter x 6.693 Inch | 170 Millimeter x 1.102 Inch | 28 Millimeter TIMKEN 2MM9122WI SUH Precision Ball Bearings online seller. NACHI BEARINGS LTD 2 Bolt Pillow Block; Long Description

What is 2MM9122WI SUH bearing cross reference?

Brand Name:TIMKEN
Model Number:2MM9122WI SUH
mounting::Two-Bolt Base
B:1-3/8 in
d:0.8750 in
operating temperature range::-20 to +220 °F
bore type::Round
radial dynamic load capacity::2801 lb
base to bore centerline::1.4375 in
radial static load capacity::1651 lb
PDF 2MM9122WI SUH

Product Details

mounting:Two-Bolt Base
B1-3/8 in
d0.8750 in
operating temperature range:-20 to +220 °F
bore type:Round
radial dynamic load capacity:2801 lb
base to bore centerline:1.4375 in
radial static load capacity:1651 lb
duty type:Normal Duty
base width:1-1/2 in
housing material:Cast Iron
D3-7/8 to 4-3/8 in
locking device:Set Screw
maximum rpm:6350 RPM
seal type:Felt Seal
lubrication type:Lubrication Fitting
expansion type:Expansion Bearing (Floating)
series:NP
overall length:5.5000 in
replacement bearing:2-014
overall height:2.8125 in
manufacturer upc number:662461243398
finish/coating:Uncoated
View more

Company Profile

Phone +1-630-612-6376
View more

Related News

  • Can you replace rod bearings with engine still in car? | For AOct 11, 2011 — He said it will need rod bearings eventually. My question iscould I change the bearings by just dropping the pan with the engine still in the car  Rod...
  • Replace both front wheel bearings, or just one? - NorthShould I replace both sides or just the one that is bad. I ask cause if it failed due to hitting a curb at speed, yes, i would do both,but if just wear and age on the factory bearings..so absent of...
  • How are bearing balls made? | Engineering360Jul 31, 2019 — Metal bearing balls are manufactured from steel wire or rod. During the first step in the process, the wire or rod is cut into small pieces called slugs. The volume of material for the...
  • Recommended Products

    All Products Contact Now