0.669 Inch | 17 Millimeter x 1.181 Inch | 30 Millimeter x 1.102 Inch | 28 Millimeter TIMKEN 3MMC9303WI QUL Precision Ball Bearings

With over 10170 full-service stores, KOYO Manufacturer Name our 0.669 Inch | 17 Millimeter x 1.181 Inch | 30 Millimeter x 1.102 Inch | 28 Millimeter TIMKEN 3MMC9303WI QUL Precision Ball Bearings inventory is 0.669 Inch | 17 Millimeter x 1.181 Inch | 30 Millimeter x 1.102 Inch | 28 Millimeter extensive and NACHI BEARINGS LTD our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.

What is 3MMC9303WI QUL bearing interchange？

Brand Name:TIMKEN
Model Number:3MMC9303WI QUL
d:1.0000 in
horizontal bolt spacing::1-5/8 in
bore type::Round
vertical bolt spacing::1-1/8 in
duty type::Standard Duty
shaft centerline height::1-13/16 in
mounting type::Three-Bolt Bracket Style
hub diameter::2-3/4 in
PDF 3MMC9303WI QUL

Product Details

d1.0000 in
horizontal bolt spacing:1-5/8 in
bore type:Round
vertical bolt spacing:1-1/8 in
duty type:Standard Duty
shaft centerline height:1-13/16 in
mounting type:Three-Bolt Bracket Style
hub diameter:2-3/4 in
housing material:Cast Iron - Teflon Protection
bracket width:2-1/2 in
locking device:Set Screw
unit standoff:1-7/16 in
radial dynamic load capacity:2680 lbf
bolt size:3/8
radial static load capacity:1420 lbf
lubrication type:Lubrication Fitting
seal type:Contact with Flinger
series:MUCFB200TC
length through bore:1.339 in
replacement bearing:MUC205-16
View more

Company Profile

NACHI BEARINGS LTD
Phone +1-630-612-6376
View more

Related News

  • Can I just replace rod bearings?
    Can you replace rod bearings with engine still in car? | For AOct 11, 2011 — He said it will need rod bearings eventually. My question iscould I change the bearings by just dropping the pan with the engine still in the car  Rod...
  • Do both wheel bearings need replaced at the same time?
    Replace both front wheel bearings, or just one? - NorthShould I replace both sides or just the one that is bad. I ask cause if it failed due to hitting a curb at speed, yes, i would do both,but if just wear and age on the factory bearings..so absent of...
  • How are steel ball bearings made?
    How are bearing balls made? | Engineering360Jul 31, 2019 — Metal bearing balls are manufactured from steel wire or rod. During the first step in the process, the wire or rod is cut into small pieces called slugs. The volume of material for the...

    • Recommended Products

    All Products Contact Now
    Contact Us