4.724 Inch | 120 Millimeter x 10.236 Inch | 260 Millimeter x 3.386 Inch | 86 Millimeter LINK BELT 22324LBC3 Spherical Roller Bearings

Various 0.21 Fatigue Load Rating (kN): Spherical Roller Bearings 4.724 Inch | 120 Millimeter x 10.236 Inch | 260 Millimeter x 3.386 Inch | 86 Millimeter types and NACHI BEARINGS LTD sizes to accommodate your 4.724 Inch | 120 Millimeter x 10.236 Inch | 260 Millimeter x 3.386 Inch | 86 Millimeter LINK BELT 22324LBC3 Spherical Roller Bearings requirements.

What is 22324LBC3 bearing cross reference´╝č

Brand Name:LINK BELT
Model Number:22324LBC3
d:1.3125 in
horizontal bolt spacing::2 in
bore type::Round
vertical bolt spacing::1-1/4 in
duty type::Standard Duty
shaft centerline height::2-3/8 in
mounting type::Three-Bolt Bracket Style
hub diameter::3-3/4 in
PDF 22324LBC3

Product Details

d1.3125 in
horizontal bolt spacing:2 in
bore type:Round
vertical bolt spacing:1-1/4 in
duty type:Standard Duty
shaft centerline height:2-3/8 in
mounting type:Three-Bolt Bracket Style
hub diameter:3-3/4 in
housing material:Cast Iron
bracket width:3-1/4 in
locking device:Set Screw
unit standoff:1-53/64 in
radial dynamic load capacity:5820 lbf
bolt size:1/2
radial static load capacity:3460 lbf
lubrication type:Lubrication Fitting
seal type:Contact with Flinger
series:UCFB200C4HR5
length through bore:1.689 in
replacement bearing:UC207-21C4HR5
View more

Company Profile

Phone +1-630-612-6376
View more

Related News

  • Can you replace rod bearings with engine still in car? | For AOct 11, 2011 — He said it will need rod bearings eventually. My question iscould I change the bearings by just dropping the pan with the engine still in the car  Rod...
  • Replace both front wheel bearings, or just one? - NorthShould I replace both sides or just the one that is bad. I ask cause if it failed due to hitting a curb at speed, yes, i would do both,but if just wear and age on the factory bearings..so absent of...
  • How are bearing balls made? | Engineering360Jul 31, 2019 — Metal bearing balls are manufactured from steel wire or rod. During the first step in the process, the wire or rod is cut into small pieces called slugs. The volume of material for the...
  • Recommended Products

    All Products Contact Now