DODGE 67576 Mounted Units & Inserts

Welcome 29 B_ to the DODGE 67576 Mounted Units & Inserts NACHI BEARINGS LTD 2 r1 online seller. 107000 C_conv

Brand Name:DODGE
Model Number:67576
Bearing number:6800
Size (mm):10x19x5
Bore Diameter (mm):10
Outer Diameter (mm):19
Width (mm):5
d:10 mm
D:19 mm
B:5 mm

Product Details

Bearing number6800
Size (mm)10x19x5
Bore Diameter (mm)10
Outer Diameter (mm)19
Width (mm)5
d10 mm
D19 mm
B5 mm
C5 mm
r min.0,3 mm
da min.12 mm
da max12,5 mm
Da max.17 mm
ra max.0,3 mm
Weight0,005 Kg
Basic dynamic load rating (C)1,83 kN
Basic static load rating (C0)0,925 kN
(Grease) Lubrication Speed32 000 r/min
(Oil) Lubrication Speed38 000 r/min
rs min0.3 mm
Radial clearance classCN
Mass0.005 kg
Dynamic load, C1.83 kN
Static load, C00.92 kN
Fatigue limit load, Cu0.04 kN
f014.8
Nlim (oil)38,000 rpm
Nlim (grease)32,000 rpm
Min operating temperature, Tmin-20 °C
Max operating temperature, Tmax120 °C
Characteristic cage frequency, FTF0.42 Hz
Characteristic rolling element frequency, BSF5.93 Hz
Characteristic outer ring frequency, BPF04.6 Hz
Characteristic inner ring frequency, BPFI6.4 Hz
da min12 mm
Da max17 mm
ra max0.3 mm
CategorySingle Row Ball Bearing
Inventory0.0
Minimum Buy QuantityN/A
Weight / Kilogram0.005
Product GroupB00308
EnclosureOpen
Precision ClassABEC 1 | ISO P0
Maximum Capacity / Filling SlotNo
Rolling ElementBall Bearing
Snap RingNo
Internal Special FeaturesNo
Cage MaterialSteel
Internal ClearanceC0-Medium
Inch - MetricMetric
Long Description10MM Bore; 19MM Outside Diameter; 5MM Outer Race Width; Open; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features; C0-Medium Internal Clearance; Steel Cage
Other FeaturesDeep Groove
UNSPSC31171504
Harmonized Tariff Code8482.10.50.68
NounBearing
Keyword StringBall
Weight / LBS0.011
Outer Race Width0.197 Inch | 5 Millimeter
Outside Diameter0.748 Inch | 19 Millimeter
Bore0.394 Inch | 10 Millimeter
Inner Race Width0 Inch | 0 Millimeter
View more

Company Profile

Phone +1-630-612-6376
View more

Related News

  • Can you replace rod bearings with engine still in car? | For AOct 11, 2011 — He said it will need rod bearings eventually. My question iscould I change the bearings by just dropping the pan with the engine still in the car  Rod...
  • Replace both front wheel bearings, or just one? - NorthShould I replace both sides or just the one that is bad. I ask cause if it failed due to hitting a curb at speed, yes, i would do both,but if just wear and age on the factory bearings..so absent of...
  • How are bearing balls made? | Engineering360Jul 31, 2019 — Metal bearing balls are manufactured from steel wire or rod. During the first step in the process, the wire or rod is cut into small pieces called slugs. The volume of material for the...
  • Recommended Products

    All Products Contact Now