0.787 Inch | 20 Millimeter x 1.85 Inch | 47 Millimeter x 2.362 Inch | 60 Millimeter TIMKEN MM20BS47 QH Precision Ball Bearings

YOU’LL FIND AN EXTENSIVE SELECTION OF 0.787 Inch | 20 Millimeter x 1.85 Inch | 47 Millimeter x 2.362 Inch | 60 Millimeter No Snap Ring 0.787 Inch | 20 Millimeter x 1.85 Inch | 47 Millimeter x 2.362 Inch | 60 Millimeter TIMKEN MM20BS47 QH Precision Ball Bearings FOR N/A Minimum Buy Quantity SALE. NACHI BEARINGS LTD

What is MM20BS47 QH bearing interchange?

Brand Name:TIMKEN
Model Number:MM20BS47 QH
d:1.4375 in
overall length::5-43/64 in
slot spacing::3.2656 in
overall height::4-39/64 in
slot width::0.6250 in
lubrication type::Lubrication Fitting
unit type::Side Mount
dynamic load capacity::7420 lbf
PDF MM20BS47 QH

Product Details

d1.4375 in
overall length:5-43/64 in
slot spacing:3.2656 in
overall height:4-39/64 in
slot width:0.6250 in
lubrication type:Lubrication Fitting
unit type:Side Mount
dynamic load capacity:7420 lbf
housing material:Cast Iron
rod hole diameter:1-9/64 in
locking device:Adapter Sleeve
series:UKT200+HA2000
seal type:Contact with Slinger
View more

Company Profile

Phone +1-630-612-6376
View more

Related News

  • Can you replace rod bearings with engine still in car? | For AOct 11, 2011 — He said it will need rod bearings eventually. My question iscould I change the bearings by just dropping the pan with the engine still in the car  Rod...
  • Replace both front wheel bearings, or just one? - NorthShould I replace both sides or just the one that is bad. I ask cause if it failed due to hitting a curb at speed, yes, i would do both,but if just wear and age on the factory bearings..so absent of...
  • How are bearing balls made? | Engineering360Jul 31, 2019 — Metal bearing balls are manufactured from steel wire or rod. During the first step in the process, the wire or rod is cut into small pieces called slugs. The volume of material for the...
  • Recommended Products

    All Products Contact Now