EBC R16 ZZ Single Row Ball Bearings

YOU’LL FIND AN NACHI BEARINGS LTD EXTENSIVE 1.00 mm Fillet Radius rb SELECTION OF EBC R16 ZZ Single Row Ball Bearings 72.00 mm B FOR SALE.

Brand Name:EBC
Model Number:R16 ZZ
Series:615
Cone Part Number:623
Cup Part Number:612-B
Design Units:Imperial
Bearing Weight:4.8 lb
Cage Type:Stamped Steel
d:2.2500 in
D:4.7500 in
PDF R16 ZZ

Product Details

Series615
Cone Part Number623
Cup Part Number612-B
Design UnitsImperial
Bearing Weight4.8 lb
Cage TypeStamped Steel
d2.2500 in
D4.7500 in
D1 - Flange Outer Diameter5.0272 in
B - Cone Width1.6250 in
C - Cup Width1.2500 in
C1 - Cup Flange Width0.2812 in
T1 - Bearing Width1.625 in
T - Bearing Width to Flange0.6562 in
R - Cone Backface To Clear Radius10.14 in
r - Cup Backface To Clear Radius20.130 in
da - Cone Frontface Backing Diameter2.6 in
db - Cone Backface Backing Diameter2.83 in
Da - Cup Frontface Backing Diameter4.35 in
Ab - Cage-Cone Frontface Clearance0.11 in
Aa - Cage-Cone Backface Clearance0.13 in
a - Effective Center Location3-0.55 in
C90 - Dynamic Radial Rating (90 million revolutions)412100 lbf
C1 - Dynamic Radial Rating (1 million revolutions)546600 lbf
C0 - Static Radial Rating54800 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)66510 lbf
K - Factor71.86
e - ISO Factor80.31
Y - ISO Factor91.91
G1 - Heat Generation Factor (Roller-Raceway)1075.9
G2 - Heat Generation Factor (Rib-Roller End)16.2
Cg - Geometry Factor110.0694
View more

Company Profile

Phone +1-630-612-6376
View more

Related News

  • Can you replace rod bearings with engine still in car? | For AOct 11, 2011 — He said it will need rod bearings eventually. My question iscould I change the bearings by just dropping the pan with the engine still in the car  Rod...
  • Replace both front wheel bearings, or just one? - NorthShould I replace both sides or just the one that is bad. I ask cause if it failed due to hitting a curb at speed, yes, i would do both,but if just wear and age on the factory bearings..so absent of...
  • How are bearing balls made? | Engineering360Jul 31, 2019 — Metal bearing balls are manufactured from steel wire or rod. During the first step in the process, the wire or rod is cut into small pieces called slugs. The volume of material for the...
  • Recommended Products

    All Products Contact Now