REXNORD MF2308B Flange Block Bearings

Welcome Radial Load Direction to the REXNORD MF2308B Flange Block Bearings online seller. NACHI BEARINGS LTD Flat Outer Ring Shape

Brand Name:REXNORD
Model Number:MF2308B
Series:M255400
Cone Part Number:M255449
Cup Part Number:M255410
Design Units:Imperial
Bearing Weight:30.8 Kg
Cage Type:Pin-Type
d:288.925 mm
D:406.400 mm
PDF MF2308B

Product Details

SeriesM255400
Cone Part NumberM255449
Cup Part NumberM255410
Design UnitsImperial
Bearing Weight30.8 Kg
Cage TypePin-Type
d288.925 mm
D406.400 mm
B - Cone Width77.788 mm
C - Cup Width60.325 mm
B77.788 mm
R - Cone Backface To Clear Radius16.35 mm
r - Cup Backface To Clear Radius23.30 mm
da - Cone Frontface Backing Diameter309.88 mm
db - Cone Backface Backing Diameter315.98 mm
Da - Cup Frontface Backing Diameter387.90 mm
Db - Cup Backface Backing Diameter378.97 mm
Ab - Cage-Cone Frontface Clearance5.6 mm
Aa - Cage-Cone Backface Clearance3.8 mm
a - Effective Center Location3-4.1 mm
C90 - Dynamic Radial Rating (90 million revolutions)469300 lbf
C1 - Dynamic Radial Rating (1 million revolutions)5267000 lbf
C0 - Static Radial Rating567000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)640100 lbf
K - Factor71.73
e - ISO Factor80.34
Y - ISO Factor91.77
G1 - Heat Generation Factor (Roller-Raceway)2300
G2 - Heat Generation Factor (Rib-Roller End)287
Cg - Geometry Factor0.172
View more

Company Profile

Phone +1-630-612-6376
View more

Related News

  • Can you replace rod bearings with engine still in car? | For AOct 11, 2011 — He said it will need rod bearings eventually. My question iscould I change the bearings by just dropping the pan with the engine still in the car  Rod...
  • Replace both front wheel bearings, or just one? - NorthShould I replace both sides or just the one that is bad. I ask cause if it failed due to hitting a curb at speed, yes, i would do both,but if just wear and age on the factory bearings..so absent of...
  • How are bearing balls made? | Engineering360Jul 31, 2019 — Metal bearing balls are manufactured from steel wire or rod. During the first step in the process, the wire or rod is cut into small pieces called slugs. The volume of material for the...
  • Recommended Products

    All Products Contact Now