NSK 6308ZZC3 Single Row Ball Bearings

Request NACHI BEARINGS LTD A Quote For 1 1/8-7 UNC Cap bolt 398.462 mm H Your Special NSK 6308ZZC3 Single Row Ball Bearings Needs Today! Free Single Row Ball Bearings Quotes. ISO 9001 certified. 339.999 mm Da

Brand Name:NSK
Model Number:6308ZZC3
Bearing number:4T-30213
Size (mm):65x120x24.75
Bore Diameter (mm):65
Outer Diameter (mm):120
Width (mm):24,75
d:65 mm
D:120 mm
T:24,75 mm
PDF 6308ZZC3

Product Details

Bearing number4T-30213
Size (mm)65x120x24.75
Bore Diameter (mm)65
Outer Diameter (mm)120
Width (mm)24,75
d65 mm
D120 mm
T24,75 mm
B23 mm
C20 mm
ra1 max.1,5 mm
a23,5 mm
r min.2 mm
r1 min.1,5 mm
da min.75 mm
Da min106 mm
Da max.111,5 mm
db max.77 mm
Db min.113 mm
ra max.2 mm
Sa4 mm
Sb4,5 mm
Weight1,18 Kg
Basic dynamic load rating (C)123 kN
Basic static load rating (C0)148 kN
(Grease) Lubrication Speed3 100 r/min
(Oil) Lubrication Speed4 200 r/min
Calculation factor (e)0,4
Calculation factor (Y0)0,81
d190.5 mm
rs min2 mm
r1s min1.5 mm
e0.4
Y21.48
Y00.81
Mass1.18 kg
ISO 355 referenceT3EB065
Dynamic load, C123 kN
Rating life coefficient, A21.4
Static load, C0148 kN
Fatigue limit load, Cu18 kN
Nlim (oil)4,200 rpm
Nlim (grease)3,100 rpm
Min operating temperature, Tmin-40 °C
Max operating temperature, Tmax120 °C
Characteristic cage frequency, FTF0.43 Hz
Characteristic rolling element frequency, BSF6.36 Hz
Characteristic outer ring frequency, BPF08.09 Hz
Characteristic inner ring frequency, BPFI10.91 Hz
da max77 mm
db min75 mm
Da max111.5 mm
Db min113 mm
Ca min4 mm
Cb min4.5 mm
ra max2 mm
r1a max1.5 mm
CategoryRoller Bearings
Inventory1.0
Minimum Buy QuantityN/A
Weight / Kilogram1.163
Product GroupB04334
View more

Company Profile

Phone +1-630-612-6376
View more

Related News

  • Can you replace rod bearings with engine still in car? | For AOct 11, 2011 — He said it will need rod bearings eventually. My question iscould I change the bearings by just dropping the pan with the engine still in the car  Rod...
  • Replace both front wheel bearings, or just one? - NorthShould I replace both sides or just the one that is bad. I ask cause if it failed due to hitting a curb at speed, yes, i would do both,but if just wear and age on the factory bearings..so absent of...
  • How are bearing balls made? | Engineering360Jul 31, 2019 — Metal bearing balls are manufactured from steel wire or rod. During the first step in the process, the wire or rod is cut into small pieces called slugs. The volume of material for the...
  • Recommended Products

    All Products Contact Now