0.75 Inch | 19.05 Millimeter x 1.563 Inch | 39.7 Millimeter x 1.28 Inch | 32.512 Millimeter QA1 PRECISION PROD YPB12T Spherical Plain Bearings - Radial

Browse NACHI BEARINGS LTD 0.75 Inch | 19.05 Millimeter x 1.563 Inch | 39.7 Millimeter x 1.28 Inch | 32.512 Millimeter QA1 PRECISION PROD YPB12T Spherical Plain Bearings - Radial 0.75 Inch | 19.05 Millimeter x 1.563 Inch | 39.7 Millimeter x 1.28 Inch | 32.512 Millimeter Categories in 35 mm d the Manufacturers Online Free. including Spherical Plain Bearings - Radial.

Brand Name:QA1 PRECISION PROD
Model Number:YPB12T
Bearing number:6705
Size (mm):25x32x4
Bore Diameter (mm):25
Outer Diameter (mm):32
Width (mm):4
d:25 mm
D:32 mm
B:4 mm
PDF YPB12T

Product Details

Bearing number6705
Size (mm)25x32x4
Bore Diameter (mm)25
Outer Diameter (mm)32
Width (mm)4
d25 mm
D32 mm
B4 mm
C4 mm
r min.0,2 mm
da min.26,6 mm
da max27,3 mm
Da max.30,4 mm
ra max.0,2 mm
Weight0,005 Kg
Basic dynamic load rating (C)1,1 kN
Basic static load rating (C0)0,84 kN
(Grease) Lubrication Speed4 000 r/min
(Oil) Lubrication Speed4 600 r/min
d127.3 mm
D130 mm
rs min0.2 mm
Radial clearance classCN
Mass0.06 kg
Dynamic load, C1.1 kN
Static load, C00.84 kN
Fatigue limit load, Cu0 kN
f015.8
Nlim (oil)4,600 rpm
Nlim (grease)4,000 rpm
Min operating temperature, Tmin-20 °C
Max operating temperature, Tmax120 °C
Characteristic cage frequency, FTF0.47 Hz
Characteristic rolling element frequency, BSF17.76 Hz
Characteristic outer ring frequency, BPF09.91 Hz
Characteristic inner ring frequency, BPFI11.09 Hz
da min26.6 mm
Da max30.4 mm
ra max0.2 mm
View more

Company Profile

Phone +1-630-612-6376
View more

Related News

  • Can you replace rod bearings with engine still in car? | For AOct 11, 2011 — He said it will need rod bearings eventually. My question iscould I change the bearings by just dropping the pan with the engine still in the car  Rod...
  • Replace both front wheel bearings, or just one? - NorthShould I replace both sides or just the one that is bad. I ask cause if it failed due to hitting a curb at speed, yes, i would do both,but if just wear and age on the factory bearings..so absent of...
  • How are bearing balls made? | Engineering360Jul 31, 2019 — Metal bearing balls are manufactured from steel wire or rod. During the first step in the process, the wire or rod is cut into small pieces called slugs. The volume of material for the...
  • Recommended Products

    All Products Contact Now