DODGE F2B-LT7-102 Mounted Units & Inserts

With over 10170 full-service stores, our DODGE F2B-LT7-102 Mounted Units & Inserts inventory Yes Retainer is extensive and our parts are priced right. within 24 hours. This helps you maximize your 0.36 Weight / LBS productivity by saving time NACHI BEARINGS LTD and your hard-earned dollars.

Brand Name:DODGE
Model Number:F2B-LT7-102
Bearing number:6313ZENR
Size (mm):65x140x33
Bore Diameter (mm):65
Outer Diameter (mm):140
Width (mm):33
d:65 mm
D:140 mm
B:33 mm
PDF F2B-LT7-102

Product Details

Bearing number6313ZENR
Size (mm)65x140x33
Bore Diameter (mm)65
Outer Diameter (mm)140
Width (mm)33
d65 mm
D140 mm
B33 mm
C33 mm
a4.9 mm
b3.1 mm
f2.82 mm
r min.2.1 mm
r1 min.0.5 mm
D1135.23 mm
D2149.7 mm
Weight2.08 Kg
Basic dynamic load rating (C)92,5 kN
Basic static load rating (C0)59,5 kN
(Grease) Lubrication Speed4700 r/min
CategorySingle Row Ball Bearing
Inventory0.0
Minimum Buy QuantityN/A
Product GroupB00308
Enclosure1 Metal Shield
Precision ClassABEC 1 | ISO P0
Maximum Capacity / Filling SlotNo
Rolling ElementBall Bearing
Snap RingYes
Internal Special FeaturesNo
Cage MaterialSteel
Internal ClearanceC0-Medium
Inch - MetricMetric
Long Description65MM Bore; 140MM Outside Diameter; 33MM Outer Race Width; 1 Metal Shield; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes Snap Ring; No Internal Special Features; C0-Medium Internal Clearance; Ste
Other FeaturesDeep Groove | With Snap Ring
UNSPSC31171504
Harmonized Tariff Code8482.10.50.68
NounBearing
Keyword StringBall
Weight / LBS4.885
Inner Race Width0 Inch | 0 Millimeter
Outside Diameter5.512 Inch | 140 Millimeter
Outer Race Width1.299 Inch | 33 Millimeter
Bore2.559 Inch | 65 Millimeter
Bore TypeCylindrical Bore
ConfigurationSingle Row
Bore Size65 mm
Width33 mm
Fillet Radius/Chamfer2.1 mm
r10.5 mm
Snap Ring Width2.8 mm
Snap Ring Outside Diameter149.7 mm
D1 (max)135.2 mm
a (max)4.9 mm
b (min)3.1 mm
Dynamic Load Rating92,500 N
Static Load Rating59,500 N
Limiting Speed - Grease4,900 rpm
Limiting Speed - Oil6,000 rpm
Factor fo13.2
Radial Clearance0.008 to 0.028 mm
da (min)77 mm
Da (max)128 mm
Dx (min)152 mm
ra (max)2 mm
Cy (max)7.3 mm
View more

Company Profile

Phone +1-630-612-6376
View more

Related News

  • Can you replace rod bearings with engine still in car? | For AOct 11, 2011 — He said it will need rod bearings eventually. My question iscould I change the bearings by just dropping the pan with the engine still in the car  Rod...
  • Replace both front wheel bearings, or just one? - NorthShould I replace both sides or just the one that is bad. I ask cause if it failed due to hitting a curb at speed, yes, i would do both,but if just wear and age on the factory bearings..so absent of...
  • How are bearing balls made? | Engineering360Jul 31, 2019 — Metal bearing balls are manufactured from steel wire or rod. During the first step in the process, the wire or rod is cut into small pieces called slugs. The volume of material for the...
  • Recommended Products

    All Products Contact Now