QM INDUSTRIES QAATU18A080SEC Take Up Unit Bearings
| Brand Name: | QM INDUSTRIES |
| Model Number: | QAATU18A080SEC |
| da: | 75 mm |
| db: | 87.313 mm |
| dc: | 71.438 mm |
| Da: | 160 mm |
| Ca: | 64.795 mm |
| A1: | 98.425 mm |
| A2: | 228.6 mm |
| ba: | 35.719 mm |
| PDF |
QAATU18A080SEC |
Product Details
| da | 75 mm |
| db | 87.313 mm |
| dc | 71.438 mm |
| Da | 160 mm |
| Ca | 64.795 mm |
| A1 | 98.425 mm |
| A2 | 228.6 mm |
| ba | 35.719 mm |
| H | 192.088 mm |
| H1 | 101.6 mm |
| H2 | 41.275 mm |
| J min. | 263.525 mm |
| J max. | 295.275 mm |
| J1 | 53.975 mm |
| L | 349.25 mm |
| N1 | 19.05 mm |
| R1 | 60.325 mm |
| R2 | 27.94 mm |
| RG | 3/8 NPT |
| PG | 1/8 NPT |
| h | 42.862 mm |
| Housing | FSAF 315 |
| Stabilizing ring | 2 x SR-1615 |
| Taconite seal (db shaft position) | TER 79 |
| Taconite seal (dc shaft position) | TER 46 |
| End plug (suffix Y) | EPR 8 |
| Max. speed for Taconite seal | 900 r/min |
| P60° | 101 kN |
| P90° | 60.9 kN |
| P120° | 38.3 kN |
| P150° | 34.7 kN |
| P180° | 42.3 kN |
| Pa | 27.1 kN |
| Mass pillow block | 20 kg |
| Cap bolt | 2 x 5/8-11 UNC |
| Cap bolt recommended tightening torque | 298.3 N·m |
| Cap bolt, SAE grade | 8 |
| Appropriate attachment bolt size G | 0.625 in |
| Initial grease fill | 286.33 g |
