SX011832 Crossed Roller Bearing|thin Section Slewing Bearing|160*200*20mm

Can't find what you're 1.4375 in d looking for SX011832 Crossed Roller Bearing|thin Section Slewing Bearing|160*200*20mm ? Our expert Excavator Bearing Representatives be in contact with you NACHI BEARINGS LTD shortly! 3.2656 in slot spacing:

d:1.4375 in
overall length::5-43/64 in
slot spacing::3.2656 in
overall height::4-39/64 in
slot width::0.6250 in
lubrication type::Lubrication Fitting
unit type::Side Mount
dynamic load capacity::7420 lbf
PDF

Product Details

d1.4375 in
overall length:5-43/64 in
slot spacing:3.2656 in
overall height:4-39/64 in
slot width:0.6250 in
lubrication type:Lubrication Fitting
unit type:Side Mount
dynamic load capacity:7420 lbf
housing material:Cast Iron
rod hole diameter:1-9/64 in
locking device:Adapter Sleeve
series:UKT200+HA2000
seal type:Contact with Slinger
View more

Company Profile

NACHI BEARINGS LTD
Phone +1-630-612-6376
View more

Related News

  • Can I just replace rod bearings?
    Can you replace rod bearings with engine still in car? | For AOct 11, 2011 — He said it will need rod bearings eventually. My question iscould I change the bearings by just dropping the pan with the engine still in the car  Rod...
  • Do both wheel bearings need replaced at the same time?
    Replace both front wheel bearings, or just one? - NorthShould I replace both sides or just the one that is bad. I ask cause if it failed due to hitting a curb at speed, yes, i would do both,but if just wear and age on the factory bearings..so absent of...
  • How are steel ball bearings made?
    How are bearing balls made? | Engineering360Jul 31, 2019 — Metal bearing balls are manufactured from steel wire or rod. During the first step in the process, the wire or rod is cut into small pieces called slugs. The volume of material for the...

    • Recommended Products

    All Products Contact Now
    Contact Us