Single Row Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

- NICE BALL BEARING 3002FDCTNTG18 Single Row Ball Bearings
- SYK 504
- 0.25 kg

- NICE BALL BEARING 1640DCTNTG18 Single Row Ball Bearings
- 6700 rpm
- 2.00 mm

- NICE BALL BEARING 1633DCTNTG18 Single Row Ball Bearings
- 2 x LOR 187
- 121 kN

- NICE BALL BEARING 1630DSTNTG18 Single Row Ball Bearings
- 146 mm
- HMV 38 E

- NICE BALL BEARING 1620DSTNTG18 Single Row Ball Bearings
- 600.075 mm
- EPR 19

- NICE BALL BEARING 1602DSTNTG18 Single Row Ball Bearings
- 60.000 mm
- 3400 rpm

- NICE BALL BEARING 1603DCTNTG18 Single Row Ball Bearings
- 222 kN
- 495.3 mm

- CONSOLIDATED BEARING 88505 NR Single Row Ball Bearings
- 108 kN
- 11.8 kN