Together REXNORD MHT8520724 Take Up Unit Bearings Application | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | d | Noun | Weight | UNSPSC | Inventory | Slot Width | Weight / LBS | Inch - Metric |
ZHT8520724 | REXNORD | 2.438 Inch | 61.925 Millimeter | Bearing | 43.584 | 31171533 | 0.0 | 0 Inch | 0 Millimeter | 96 | Inch |
ZNT8520724 | REXNORD | 2.438 Inch | 61.925 Millimeter | Bearing | 34.5 | 31171533 | 0.0 | 0 Inch | 0 Millimeter | 76 | Inch |
MHT8520724 | REXNORD | 2.438 Inch | 61.925 Millimeter | Bearing | 43.584 | 31171533 | 0.0 | 0 Inch | 0 Millimeter | 96 | Inch |
QM INDUSTRIES QVVTU19V308SM Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QAATU18A304SO Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V100SEO Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V311SEM Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V311SEN Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QMTU10J050SC Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QMTU10J050SEC Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QMTU10J115SET Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V100SEC Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V100SO Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QMTU10J200SN Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QAATU18A304SEN Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
REXNORD MHT8520724 Take Up Unit Bearings Video