Together REXNORD MT55111 Take Up Unit Bearings Application | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | d | Noun | Weight | UNSPSC | Inventory | Slot Width | Weight / LBS | Inch - Metric |
ZT55111 | REXNORD | 1.688 Inch | 42.875 Millimeter | Bearing | 4.631 | 31171533 | 0.0 | 0.688 Inch | 17.475 Millimeter | 10.2 | Inch |
MT55111 | REXNORD | 1.688 Inch | 42.875 Millimeter | Bearing | 4.631 | 31171533 | 0.0 | 0.688 Inch | 17.475 Millimeter | 10.2 | Inch |
QM INDUSTRIES QVVTU22V311SEM Take Up Unit Bearings | da:70 mm; db:82.55 mm; dc:66.675 mm; Da:150 mm; Ca:60.808 mm; A1:88.9 mm; A2:136.525 mm; S:4.763 mm; ba:42.069 mm; H:187.325 mm; H1:95.25 mm; H2:33.337 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:37.306 mm; Housing:FSAF 314; Stabilizing ring:SR-17-14; Labyrinth ring (db shaft position):LOR 64; PosiTrac Plus contact element (db shaft position):B10724-64; Labyrinth ring (dc shaft position):LOR 43; PosiTrac Plus contact element (dc shaft position):B10724-44; End plug (suffix Y):EPR 8; Max. speed for PosiTrac Plus seal:1450 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:34.7 kN; P150°:30.7 kN; P180°:37.8 kN; Pa:24.5 kN; Mass pillow block:19.4 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QAATU18A304SO Take Up Unit Bearings | da:70 mm; db:82.55 mm; dc:66.675 mm; Da:150 mm; Ca:60.808 mm; A1:88.9 mm; A2:136.525 mm; S:4.763 mm; ba:42.069 mm; H:187.325 mm; H1:95.25 mm; H2:33.337 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:37.306 mm; Housing:FSAF 314; Stabilizing ring:SR-17-14; Labyrinth ring (db shaft position):LOR 64; PosiTrac Plus contact element (db shaft position):B10724-64; Labyrinth ring (dc shaft position):LOR 43; PosiTrac Plus contact element (dc shaft position):B10724-44; End plug (suffix Y):EPR 8; Max. speed for PosiTrac Plus seal:1450 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:34.7 kN; P150°:30.7 kN; P180°:37.8 kN; Pa:24.5 kN; Mass pillow block:19.4 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QMTU10J200SN Take Up Unit Bearings | da:70 mm; db:82.55 mm; dc:66.675 mm; Da:150 mm; Ca:60.808 mm; A1:88.9 mm; A2:136.525 mm; S:4.763 mm; ba:42.069 mm; H:187.325 mm; H1:95.25 mm; H2:33.337 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:37.306 mm; Housing:FSAF 314; Stabilizing ring:SR-17-14; Labyrinth ring (db shaft position):LOR 64; PosiTrac Plus contact element (db shaft position):B10724-64; Labyrinth ring (dc shaft position):LOR 43; PosiTrac Plus contact element (dc shaft position):B10724-44; End plug (suffix Y):EPR 8; Max. speed for PosiTrac Plus seal:1450 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:34.7 kN; P150°:30.7 kN; P180°:37.8 kN; Pa:24.5 kN; Mass pillow block:19.4 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QMTU10J050SEC Take Up Unit Bearings | da:70 mm; db:82.55 mm; dc:66.675 mm; Da:150 mm; Ca:60.808 mm; A1:88.9 mm; A2:136.525 mm; S:4.763 mm; ba:42.069 mm; H:187.325 mm; H1:95.25 mm; H2:33.337 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:37.306 mm; Housing:FSAF 314; Stabilizing ring:SR-17-14; Labyrinth ring (db shaft position):LOR 64; PosiTrac Plus contact element (db shaft position):B10724-64; Labyrinth ring (dc shaft position):LOR 43; PosiTrac Plus contact element (dc shaft position):B10724-44; End plug (suffix Y):EPR 8; Max. speed for PosiTrac Plus seal:1450 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:34.7 kN; P150°:30.7 kN; P180°:37.8 kN; Pa:24.5 kN; Mass pillow block:19.4 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QMTU10J115SET Take Up Unit Bearings | da:70 mm; db:82.55 mm; dc:66.675 mm; Da:150 mm; Ca:60.808 mm; A1:88.9 mm; A2:136.525 mm; S:4.763 mm; ba:42.069 mm; H:187.325 mm; H1:95.25 mm; H2:33.337 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:37.306 mm; Housing:FSAF 314; Stabilizing ring:SR-17-14; Labyrinth ring (db shaft position):LOR 64; PosiTrac Plus contact element (db shaft position):B10724-64; Labyrinth ring (dc shaft position):LOR 43; PosiTrac Plus contact element (dc shaft position):B10724-44; End plug (suffix Y):EPR 8; Max. speed for PosiTrac Plus seal:1450 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:34.7 kN; P150°:30.7 kN; P180°:37.8 kN; Pa:24.5 kN; Mass pillow block:19.4 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V311SEN Take Up Unit Bearings | da:70 mm; db:82.55 mm; dc:66.675 mm; Da:150 mm; Ca:60.808 mm; A1:88.9 mm; A2:136.525 mm; S:4.763 mm; ba:42.069 mm; H:187.325 mm; H1:95.25 mm; H2:33.337 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:37.306 mm; Housing:FSAF 314; Stabilizing ring:SR-17-14; Labyrinth ring (db shaft position):LOR 64; PosiTrac Plus contact element (db shaft position):B10724-64; Labyrinth ring (dc shaft position):LOR 43; PosiTrac Plus contact element (dc shaft position):B10724-44; End plug (suffix Y):EPR 8; Max. speed for PosiTrac Plus seal:1450 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:34.7 kN; P150°:30.7 kN; P180°:37.8 kN; Pa:24.5 kN; Mass pillow block:19.4 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QAATU18A304SEN Take Up Unit Bearings | da:70 mm; db:82.55 mm; dc:66.675 mm; Da:150 mm; Ca:60.808 mm; A1:88.9 mm; A2:136.525 mm; S:4.763 mm; ba:42.069 mm; H:187.325 mm; H1:95.25 mm; H2:33.337 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:37.306 mm; Housing:FSAF 314; Stabilizing ring:SR-17-14; Labyrinth ring (db shaft position):LOR 64; PosiTrac Plus contact element (db shaft position):B10724-64; Labyrinth ring (dc shaft position):LOR 43; PosiTrac Plus contact element (dc shaft position):B10724-44; End plug (suffix Y):EPR 8; Max. speed for PosiTrac Plus seal:1450 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:34.7 kN; P150°:30.7 kN; P180°:37.8 kN; Pa:24.5 kN; Mass pillow block:19.4 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V100SO Take Up Unit Bearings | da:70 mm; db:82.55 mm; dc:66.675 mm; Da:150 mm; Ca:60.808 mm; A1:88.9 mm; A2:136.525 mm; S:4.763 mm; ba:42.069 mm; H:187.325 mm; H1:95.25 mm; H2:33.337 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:37.306 mm; Housing:FSAF 314; Stabilizing ring:SR-17-14; Labyrinth ring (db shaft position):LOR 64; PosiTrac Plus contact element (db shaft position):B10724-64; Labyrinth ring (dc shaft position):LOR 43; PosiTrac Plus contact element (dc shaft position):B10724-44; End plug (suffix Y):EPR 8; Max. speed for PosiTrac Plus seal:1450 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:34.7 kN; P150°:30.7 kN; P180°:37.8 kN; Pa:24.5 kN; Mass pillow block:19.4 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V100SEC Take Up Unit Bearings | da:70 mm; db:82.55 mm; dc:66.675 mm; Da:150 mm; Ca:60.808 mm; A1:88.9 mm; A2:136.525 mm; S:4.763 mm; ba:42.069 mm; H:187.325 mm; H1:95.25 mm; H2:33.337 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:37.306 mm; Housing:FSAF 314; Stabilizing ring:SR-17-14; Labyrinth ring (db shaft position):LOR 64; PosiTrac Plus contact element (db shaft position):B10724-64; Labyrinth ring (dc shaft position):LOR 43; PosiTrac Plus contact element (dc shaft position):B10724-44; End plug (suffix Y):EPR 8; Max. speed for PosiTrac Plus seal:1450 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:34.7 kN; P150°:30.7 kN; P180°:37.8 kN; Pa:24.5 kN; Mass pillow block:19.4 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QMTU10J050SC Take Up Unit Bearings | da:70 mm; db:82.55 mm; dc:66.675 mm; Da:150 mm; Ca:60.808 mm; A1:88.9 mm; A2:136.525 mm; S:4.763 mm; ba:42.069 mm; H:187.325 mm; H1:95.25 mm; H2:33.337 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:37.306 mm; Housing:FSAF 314; Stabilizing ring:SR-17-14; Labyrinth ring (db shaft position):LOR 64; PosiTrac Plus contact element (db shaft position):B10724-64; Labyrinth ring (dc shaft position):LOR 43; PosiTrac Plus contact element (dc shaft position):B10724-44; End plug (suffix Y):EPR 8; Max. speed for PosiTrac Plus seal:1450 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:34.7 kN; P150°:30.7 kN; P180°:37.8 kN; Pa:24.5 kN; Mass pillow block:19.4 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU19V308SM Take Up Unit Bearings | da:70 mm; db:82.55 mm; dc:66.675 mm; Da:150 mm; Ca:60.808 mm; A1:88.9 mm; A2:136.525 mm; S:4.763 mm; ba:42.069 mm; H:187.325 mm; H1:95.25 mm; H2:33.337 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:37.306 mm; Housing:FSAF 314; Stabilizing ring:SR-17-14; Labyrinth ring (db shaft position):LOR 64; PosiTrac Plus contact element (db shaft position):B10724-64; Labyrinth ring (dc shaft position):LOR 43; PosiTrac Plus contact element (dc shaft position):B10724-44; End plug (suffix Y):EPR 8; Max. speed for PosiTrac Plus seal:1450 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:34.7 kN; P150°:30.7 kN; P180°:37.8 kN; Pa:24.5 kN; Mass pillow block:19.4 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V100SEO Take Up Unit Bearings | da:70 mm; db:82.55 mm; dc:66.675 mm; Da:150 mm; Ca:60.808 mm; A1:88.9 mm; A2:136.525 mm; S:4.763 mm; ba:42.069 mm; H:187.325 mm; H1:95.25 mm; H2:33.337 mm; J min.:263.525 mm; J max.:295.275 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:37.306 mm; Housing:FSAF 314; Stabilizing ring:SR-17-14; Labyrinth ring (db shaft position):LOR 64; PosiTrac Plus contact element (db shaft position):B10724-64; Labyrinth ring (dc shaft position):LOR 43; PosiTrac Plus contact element (dc shaft position):B10724-44; End plug (suffix Y):EPR 8; Max. speed for PosiTrac Plus seal:1450 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:34.7 kN; P150°:30.7 kN; P180°:37.8 kN; Pa:24.5 kN; Mass pillow block:19.4 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
REXNORD MT55111 Take Up Unit Bearings Video