Together REXNORD MT63115 Take Up Unit Bearings Application | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | d | Noun | Weight | UNSPSC | travel: | Inventory | Slot Width | frame type: |
MN63115 | REXNORD | - | - | 5.902 | - | - | 0.0 | - | - |
ZT63115 | REXNORD | 1.938 Inch | 49.225 Millimeter | Bearing | 4.585 | 31171533 | - | 0.0 | 0.688 Inch | 17.475 Millimeter | - |
MT63115 | REXNORD | 1.938 Inch | 49.225 Millimeter | Bearing | 4.585 | 31171533 | - | 0.0 | 0.688 Inch | 17.475 Millimeter | - |
ZN63115 | REXNORD | - | - | 5.902 | - | - | 0.0 | - | - |
163115.00 | LEESON | - | - | - | - | - | 0.0 | - | - |
ZAT631159 | Rexnord | 1-15/16 in | - | - | - | 9 in | - | - | Center Pull |
QM INDUSTRIES QMTU10J050SEC Take Up Unit Bearings | da:61.913 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; S:3.175 mm; ba:32.544 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:28.575 mm; Housing:FSAF 515; Stabilizing ring:SR-15-0; Labyrinth ring:2 x LOR 37; PosiTrac Plus contact element:2 x B10724-37; End plug (suffix Y):EPR 7; Max. speed for PosiTrac Plus seal:2350 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:6.67 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:68.04 g; |
QM INDUSTRIES QMTU10J200SN Take Up Unit Bearings | da:61.913 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; S:3.175 mm; ba:32.544 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:28.575 mm; Housing:FSAF 515; Stabilizing ring:SR-15-0; Labyrinth ring:2 x LOR 37; PosiTrac Plus contact element:2 x B10724-37; End plug (suffix Y):EPR 7; Max. speed for PosiTrac Plus seal:2350 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:6.67 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:68.04 g; |
QM INDUSTRIES QVVTU22V100SEC Take Up Unit Bearings | da:61.913 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; S:3.175 mm; ba:32.544 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:28.575 mm; Housing:FSAF 515; Stabilizing ring:SR-15-0; Labyrinth ring:2 x LOR 37; PosiTrac Plus contact element:2 x B10724-37; End plug (suffix Y):EPR 7; Max. speed for PosiTrac Plus seal:2350 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:6.67 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:68.04 g; |
QM INDUSTRIES QVVTU22V311SEN Take Up Unit Bearings | da:61.913 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; S:3.175 mm; ba:32.544 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:28.575 mm; Housing:FSAF 515; Stabilizing ring:SR-15-0; Labyrinth ring:2 x LOR 37; PosiTrac Plus contact element:2 x B10724-37; End plug (suffix Y):EPR 7; Max. speed for PosiTrac Plus seal:2350 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:6.67 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:68.04 g; |
QM INDUSTRIES QVVTU22V311SEM Take Up Unit Bearings | da:61.913 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; S:3.175 mm; ba:32.544 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:28.575 mm; Housing:FSAF 515; Stabilizing ring:SR-15-0; Labyrinth ring:2 x LOR 37; PosiTrac Plus contact element:2 x B10724-37; End plug (suffix Y):EPR 7; Max. speed for PosiTrac Plus seal:2350 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:6.67 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:68.04 g; |
QM INDUSTRIES QMTU10J115SET Take Up Unit Bearings | da:61.913 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; S:3.175 mm; ba:32.544 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:28.575 mm; Housing:FSAF 515; Stabilizing ring:SR-15-0; Labyrinth ring:2 x LOR 37; PosiTrac Plus contact element:2 x B10724-37; End plug (suffix Y):EPR 7; Max. speed for PosiTrac Plus seal:2350 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:6.67 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:68.04 g; |
QM INDUSTRIES QAATU18A304SEN Take Up Unit Bearings | da:61.913 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; S:3.175 mm; ba:32.544 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:28.575 mm; Housing:FSAF 515; Stabilizing ring:SR-15-0; Labyrinth ring:2 x LOR 37; PosiTrac Plus contact element:2 x B10724-37; End plug (suffix Y):EPR 7; Max. speed for PosiTrac Plus seal:2350 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:6.67 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:68.04 g; |
QM INDUSTRIES QVVTU22V100SEO Take Up Unit Bearings | da:61.913 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; S:3.175 mm; ba:32.544 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:28.575 mm; Housing:FSAF 515; Stabilizing ring:SR-15-0; Labyrinth ring:2 x LOR 37; PosiTrac Plus contact element:2 x B10724-37; End plug (suffix Y):EPR 7; Max. speed for PosiTrac Plus seal:2350 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:6.67 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:68.04 g; |
QM INDUSTRIES QMTU10J050SC Take Up Unit Bearings | da:61.913 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; S:3.175 mm; ba:32.544 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:28.575 mm; Housing:FSAF 515; Stabilizing ring:SR-15-0; Labyrinth ring:2 x LOR 37; PosiTrac Plus contact element:2 x B10724-37; End plug (suffix Y):EPR 7; Max. speed for PosiTrac Plus seal:2350 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:6.67 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:68.04 g; |
QM INDUSTRIES QVVTU19V308SM Take Up Unit Bearings | da:61.913 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; S:3.175 mm; ba:32.544 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:28.575 mm; Housing:FSAF 515; Stabilizing ring:SR-15-0; Labyrinth ring:2 x LOR 37; PosiTrac Plus contact element:2 x B10724-37; End plug (suffix Y):EPR 7; Max. speed for PosiTrac Plus seal:2350 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:6.67 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:68.04 g; |
QM INDUSTRIES QAATU18A304SO Take Up Unit Bearings | da:61.913 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; S:3.175 mm; ba:32.544 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:28.575 mm; Housing:FSAF 515; Stabilizing ring:SR-15-0; Labyrinth ring:2 x LOR 37; PosiTrac Plus contact element:2 x B10724-37; End plug (suffix Y):EPR 7; Max. speed for PosiTrac Plus seal:2350 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:6.67 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:68.04 g; |
QM INDUSTRIES QVVTU22V100SO Take Up Unit Bearings | da:61.913 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; S:3.175 mm; ba:32.544 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:28.575 mm; Housing:FSAF 515; Stabilizing ring:SR-15-0; Labyrinth ring:2 x LOR 37; PosiTrac Plus contact element:2 x B10724-37; End plug (suffix Y):EPR 7; Max. speed for PosiTrac Plus seal:2350 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:6.67 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:68.04 g; |
REXNORD MT63115 Take Up Unit Bearings Video