| QM INDUSTRIES QMTU10J200SN Take Up Unit Bearings | da:203.2 mm; Da:339.999 mm; Ca:101.803 mm; A1:190.5 mm; A2:276.225 mm; ba:80.169 mm; H:400.05 mm; H1:200.025 mm; H2:79.375 mm; J min.:549.275 mm; J max.:619.125 mm; J1:114.3 mm; L:711.2 mm; N1:34.925 mm; R1:120.65 mm; R2:42.069 mm; RG:1 NPT; PG:1/4 NPT; h:57.15 mm; Housing:SAFS 044 KA; Stabilizing ring:2 x 36053-140; Labyrinth ring:2 x LOR 168; End plug (suffix Y):EPR 23; Bearing limiting speed:2000 r/min; P60°:416 kN; P90°:249 kN; P120°:151 kN; P150°:136 kN; P180°:160 kN; Pa:59.6 kN; Mass pillow block:208 kg; Cap bolt:1 1/8-7 UNC; Cap bolt recommended tightening torque:1735.4 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:1672.65 g; |
| QM INDUSTRIES QVVTU22V100SEC Take Up Unit Bearings | da:203.2 mm; Da:339.999 mm; Ca:101.803 mm; A1:190.5 mm; A2:276.225 mm; ba:80.169 mm; H:400.05 mm; H1:200.025 mm; H2:79.375 mm; J min.:549.275 mm; J max.:619.125 mm; J1:114.3 mm; L:711.2 mm; N1:34.925 mm; R1:120.65 mm; R2:42.069 mm; RG:1 NPT; PG:1/4 NPT; h:57.15 mm; Housing:SAFS 044 KA; Stabilizing ring:2 x 36053-140; Labyrinth ring:2 x LOR 168; End plug (suffix Y):EPR 23; Bearing limiting speed:2000 r/min; P60°:416 kN; P90°:249 kN; P120°:151 kN; P150°:136 kN; P180°:160 kN; Pa:59.6 kN; Mass pillow block:208 kg; Cap bolt:1 1/8-7 UNC; Cap bolt recommended tightening torque:1735.4 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:1672.65 g; |
| QM INDUSTRIES QVVTU19V308SM Take Up Unit Bearings | da:203.2 mm; Da:339.999 mm; Ca:101.803 mm; A1:190.5 mm; A2:276.225 mm; ba:80.169 mm; H:400.05 mm; H1:200.025 mm; H2:79.375 mm; J min.:549.275 mm; J max.:619.125 mm; J1:114.3 mm; L:711.2 mm; N1:34.925 mm; R1:120.65 mm; R2:42.069 mm; RG:1 NPT; PG:1/4 NPT; h:57.15 mm; Housing:SAFS 044 KA; Stabilizing ring:2 x 36053-140; Labyrinth ring:2 x LOR 168; End plug (suffix Y):EPR 23; Bearing limiting speed:2000 r/min; P60°:416 kN; P90°:249 kN; P120°:151 kN; P150°:136 kN; P180°:160 kN; Pa:59.6 kN; Mass pillow block:208 kg; Cap bolt:1 1/8-7 UNC; Cap bolt recommended tightening torque:1735.4 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:1672.65 g; |
| QM INDUSTRIES QVVTU22V100SEO Take Up Unit Bearings | da:203.2 mm; Da:339.999 mm; Ca:101.803 mm; A1:190.5 mm; A2:276.225 mm; ba:80.169 mm; H:400.05 mm; H1:200.025 mm; H2:79.375 mm; J min.:549.275 mm; J max.:619.125 mm; J1:114.3 mm; L:711.2 mm; N1:34.925 mm; R1:120.65 mm; R2:42.069 mm; RG:1 NPT; PG:1/4 NPT; h:57.15 mm; Housing:SAFS 044 KA; Stabilizing ring:2 x 36053-140; Labyrinth ring:2 x LOR 168; End plug (suffix Y):EPR 23; Bearing limiting speed:2000 r/min; P60°:416 kN; P90°:249 kN; P120°:151 kN; P150°:136 kN; P180°:160 kN; Pa:59.6 kN; Mass pillow block:208 kg; Cap bolt:1 1/8-7 UNC; Cap bolt recommended tightening torque:1735.4 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:1672.65 g; |
| QM INDUSTRIES QMTU10J115SET Take Up Unit Bearings | da:203.2 mm; Da:339.999 mm; Ca:101.803 mm; A1:190.5 mm; A2:276.225 mm; ba:80.169 mm; H:400.05 mm; H1:200.025 mm; H2:79.375 mm; J min.:549.275 mm; J max.:619.125 mm; J1:114.3 mm; L:711.2 mm; N1:34.925 mm; R1:120.65 mm; R2:42.069 mm; RG:1 NPT; PG:1/4 NPT; h:57.15 mm; Housing:SAFS 044 KA; Stabilizing ring:2 x 36053-140; Labyrinth ring:2 x LOR 168; End plug (suffix Y):EPR 23; Bearing limiting speed:2000 r/min; P60°:416 kN; P90°:249 kN; P120°:151 kN; P150°:136 kN; P180°:160 kN; Pa:59.6 kN; Mass pillow block:208 kg; Cap bolt:1 1/8-7 UNC; Cap bolt recommended tightening torque:1735.4 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:1672.65 g; |
| QM INDUSTRIES QVVTU22V311SEM Take Up Unit Bearings | da:203.2 mm; Da:339.999 mm; Ca:101.803 mm; A1:190.5 mm; A2:276.225 mm; ba:80.169 mm; H:400.05 mm; H1:200.025 mm; H2:79.375 mm; J min.:549.275 mm; J max.:619.125 mm; J1:114.3 mm; L:711.2 mm; N1:34.925 mm; R1:120.65 mm; R2:42.069 mm; RG:1 NPT; PG:1/4 NPT; h:57.15 mm; Housing:SAFS 044 KA; Stabilizing ring:2 x 36053-140; Labyrinth ring:2 x LOR 168; End plug (suffix Y):EPR 23; Bearing limiting speed:2000 r/min; P60°:416 kN; P90°:249 kN; P120°:151 kN; P150°:136 kN; P180°:160 kN; Pa:59.6 kN; Mass pillow block:208 kg; Cap bolt:1 1/8-7 UNC; Cap bolt recommended tightening torque:1735.4 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:1672.65 g; |
| QM INDUSTRIES QVVTU22V100SO Take Up Unit Bearings | da:203.2 mm; Da:339.999 mm; Ca:101.803 mm; A1:190.5 mm; A2:276.225 mm; ba:80.169 mm; H:400.05 mm; H1:200.025 mm; H2:79.375 mm; J min.:549.275 mm; J max.:619.125 mm; J1:114.3 mm; L:711.2 mm; N1:34.925 mm; R1:120.65 mm; R2:42.069 mm; RG:1 NPT; PG:1/4 NPT; h:57.15 mm; Housing:SAFS 044 KA; Stabilizing ring:2 x 36053-140; Labyrinth ring:2 x LOR 168; End plug (suffix Y):EPR 23; Bearing limiting speed:2000 r/min; P60°:416 kN; P90°:249 kN; P120°:151 kN; P150°:136 kN; P180°:160 kN; Pa:59.6 kN; Mass pillow block:208 kg; Cap bolt:1 1/8-7 UNC; Cap bolt recommended tightening torque:1735.4 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:1672.65 g; |
| QM INDUSTRIES QMTU10J050SC Take Up Unit Bearings | da:203.2 mm; Da:339.999 mm; Ca:101.803 mm; A1:190.5 mm; A2:276.225 mm; ba:80.169 mm; H:400.05 mm; H1:200.025 mm; H2:79.375 mm; J min.:549.275 mm; J max.:619.125 mm; J1:114.3 mm; L:711.2 mm; N1:34.925 mm; R1:120.65 mm; R2:42.069 mm; RG:1 NPT; PG:1/4 NPT; h:57.15 mm; Housing:SAFS 044 KA; Stabilizing ring:2 x 36053-140; Labyrinth ring:2 x LOR 168; End plug (suffix Y):EPR 23; Bearing limiting speed:2000 r/min; P60°:416 kN; P90°:249 kN; P120°:151 kN; P150°:136 kN; P180°:160 kN; Pa:59.6 kN; Mass pillow block:208 kg; Cap bolt:1 1/8-7 UNC; Cap bolt recommended tightening torque:1735.4 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:1672.65 g; |
| QM INDUSTRIES QAATU18A304SEN Take Up Unit Bearings | da:203.2 mm; Da:339.999 mm; Ca:101.803 mm; A1:190.5 mm; A2:276.225 mm; ba:80.169 mm; H:400.05 mm; H1:200.025 mm; H2:79.375 mm; J min.:549.275 mm; J max.:619.125 mm; J1:114.3 mm; L:711.2 mm; N1:34.925 mm; R1:120.65 mm; R2:42.069 mm; RG:1 NPT; PG:1/4 NPT; h:57.15 mm; Housing:SAFS 044 KA; Stabilizing ring:2 x 36053-140; Labyrinth ring:2 x LOR 168; End plug (suffix Y):EPR 23; Bearing limiting speed:2000 r/min; P60°:416 kN; P90°:249 kN; P120°:151 kN; P150°:136 kN; P180°:160 kN; Pa:59.6 kN; Mass pillow block:208 kg; Cap bolt:1 1/8-7 UNC; Cap bolt recommended tightening torque:1735.4 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:1672.65 g; |
| QM INDUSTRIES QMTU10J050SEC Take Up Unit Bearings | da:203.2 mm; Da:339.999 mm; Ca:101.803 mm; A1:190.5 mm; A2:276.225 mm; ba:80.169 mm; H:400.05 mm; H1:200.025 mm; H2:79.375 mm; J min.:549.275 mm; J max.:619.125 mm; J1:114.3 mm; L:711.2 mm; N1:34.925 mm; R1:120.65 mm; R2:42.069 mm; RG:1 NPT; PG:1/4 NPT; h:57.15 mm; Housing:SAFS 044 KA; Stabilizing ring:2 x 36053-140; Labyrinth ring:2 x LOR 168; End plug (suffix Y):EPR 23; Bearing limiting speed:2000 r/min; P60°:416 kN; P90°:249 kN; P120°:151 kN; P150°:136 kN; P180°:160 kN; Pa:59.6 kN; Mass pillow block:208 kg; Cap bolt:1 1/8-7 UNC; Cap bolt recommended tightening torque:1735.4 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:1672.65 g; |
| QM INDUSTRIES QVVTU22V311SEN Take Up Unit Bearings | da:203.2 mm; Da:339.999 mm; Ca:101.803 mm; A1:190.5 mm; A2:276.225 mm; ba:80.169 mm; H:400.05 mm; H1:200.025 mm; H2:79.375 mm; J min.:549.275 mm; J max.:619.125 mm; J1:114.3 mm; L:711.2 mm; N1:34.925 mm; R1:120.65 mm; R2:42.069 mm; RG:1 NPT; PG:1/4 NPT; h:57.15 mm; Housing:SAFS 044 KA; Stabilizing ring:2 x 36053-140; Labyrinth ring:2 x LOR 168; End plug (suffix Y):EPR 23; Bearing limiting speed:2000 r/min; P60°:416 kN; P90°:249 kN; P120°:151 kN; P150°:136 kN; P180°:160 kN; Pa:59.6 kN; Mass pillow block:208 kg; Cap bolt:1 1/8-7 UNC; Cap bolt recommended tightening torque:1735.4 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:1672.65 g; |
| QM INDUSTRIES QAATU18A304SO Take Up Unit Bearings | da:203.2 mm; Da:339.999 mm; Ca:101.803 mm; A1:190.5 mm; A2:276.225 mm; ba:80.169 mm; H:400.05 mm; H1:200.025 mm; H2:79.375 mm; J min.:549.275 mm; J max.:619.125 mm; J1:114.3 mm; L:711.2 mm; N1:34.925 mm; R1:120.65 mm; R2:42.069 mm; RG:1 NPT; PG:1/4 NPT; h:57.15 mm; Housing:SAFS 044 KA; Stabilizing ring:2 x 36053-140; Labyrinth ring:2 x LOR 168; End plug (suffix Y):EPR 23; Bearing limiting speed:2000 r/min; P60°:416 kN; P90°:249 kN; P120°:151 kN; P150°:136 kN; P180°:160 kN; Pa:59.6 kN; Mass pillow block:208 kg; Cap bolt:1 1/8-7 UNC; Cap bolt recommended tightening torque:1735.4 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.25 in; Initial grease fill:1672.65 g; |