Together REXNORD ZNT11240024 Take Up Unit Bearings Application | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | d | Noun | UNSPSC | Weight | Inventory | Slot Width | Weight / LBS | Housing Style |
ZNT11240024 | REXNORD | 4 Inch | 101.6 Millimeter | Bearing | 31171533 | 113.05 | 0.0 | 0 Inch | 0 Millimeter | 249 | Top Angle |
ZHT11240024 | REXNORD | 4 Inch | 101.6 Millimeter | Bearing | 31171533 | 131.21 | 0.0 | 0 Inch | 0 Millimeter | 289 | Center Pull Vertical |
QM INDUSTRIES QVVTU22V100SEC Take Up Unit Bearings | da:98.425 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:165.1 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 522; Stabilizing ring:SR-22-19; Labyrinth ring:2 x LOR 108; End plug (suffix Y):EPR 13; Bearing limiting speed:4000 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:17.3 kN; Mass pillow block:52.2 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
QM INDUSTRIES QAATU18A304SEN Take Up Unit Bearings | da:98.425 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:165.1 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 522; Stabilizing ring:SR-22-19; Labyrinth ring:2 x LOR 108; End plug (suffix Y):EPR 13; Bearing limiting speed:4000 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:17.3 kN; Mass pillow block:52.2 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
QM INDUSTRIES QVVTU22V311SEN Take Up Unit Bearings | da:98.425 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:165.1 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 522; Stabilizing ring:SR-22-19; Labyrinth ring:2 x LOR 108; End plug (suffix Y):EPR 13; Bearing limiting speed:4000 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:17.3 kN; Mass pillow block:52.2 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
QM INDUSTRIES QVVTU22V100SO Take Up Unit Bearings | da:98.425 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:165.1 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 522; Stabilizing ring:SR-22-19; Labyrinth ring:2 x LOR 108; End plug (suffix Y):EPR 13; Bearing limiting speed:4000 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:17.3 kN; Mass pillow block:52.2 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
QM INDUSTRIES QMTU10J050SEC Take Up Unit Bearings | da:98.425 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:165.1 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 522; Stabilizing ring:SR-22-19; Labyrinth ring:2 x LOR 108; End plug (suffix Y):EPR 13; Bearing limiting speed:4000 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:17.3 kN; Mass pillow block:52.2 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
QM INDUSTRIES QVVTU22V100SEO Take Up Unit Bearings | da:98.425 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:165.1 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 522; Stabilizing ring:SR-22-19; Labyrinth ring:2 x LOR 108; End plug (suffix Y):EPR 13; Bearing limiting speed:4000 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:17.3 kN; Mass pillow block:52.2 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
QM INDUSTRIES QMTU10J200SN Take Up Unit Bearings | da:98.425 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:165.1 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 522; Stabilizing ring:SR-22-19; Labyrinth ring:2 x LOR 108; End plug (suffix Y):EPR 13; Bearing limiting speed:4000 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:17.3 kN; Mass pillow block:52.2 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
QM INDUSTRIES QVVTU19V308SM Take Up Unit Bearings | da:98.425 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:165.1 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 522; Stabilizing ring:SR-22-19; Labyrinth ring:2 x LOR 108; End plug (suffix Y):EPR 13; Bearing limiting speed:4000 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:17.3 kN; Mass pillow block:52.2 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
QM INDUSTRIES QVVTU22V311SEM Take Up Unit Bearings | da:98.425 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:165.1 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 522; Stabilizing ring:SR-22-19; Labyrinth ring:2 x LOR 108; End plug (suffix Y):EPR 13; Bearing limiting speed:4000 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:17.3 kN; Mass pillow block:52.2 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
QM INDUSTRIES QMTU10J115SET Take Up Unit Bearings | da:98.425 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:165.1 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 522; Stabilizing ring:SR-22-19; Labyrinth ring:2 x LOR 108; End plug (suffix Y):EPR 13; Bearing limiting speed:4000 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:17.3 kN; Mass pillow block:52.2 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
QM INDUSTRIES QMTU10J050SC Take Up Unit Bearings | da:98.425 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:165.1 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 522; Stabilizing ring:SR-22-19; Labyrinth ring:2 x LOR 108; End plug (suffix Y):EPR 13; Bearing limiting speed:4000 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:17.3 kN; Mass pillow block:52.2 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
QM INDUSTRIES QAATU18A304SO Take Up Unit Bearings | da:98.425 mm; Da:200 mm; Ca:62.89 mm; A1:120.65 mm; A2:165.1 mm; S:4.763 mm; ba:50.006 mm; H:244.475 mm; H1:125.425 mm; H2:52.388 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAFS 522; Stabilizing ring:SR-22-19; Labyrinth ring:2 x LOR 108; End plug (suffix Y):EPR 13; Bearing limiting speed:4000 r/min; P60°:178 kN; P90°:107 kN; P120°:66.7 kN; P150°:59.6 kN; P180°:72.5 kN; Pa:17.3 kN; Mass pillow block:52.2 kg; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
REXNORD ZNT11240024 Take Up Unit Bearings Video