| QM INDUSTRIES QVVTU22V100SO Take Up Unit Bearings | da:165.1 mm; Da:279.999 mm; Ca:102.794 mm; A1:158.75 mm; A2:222.25 mm; ba:68.263 mm; H:336.55 mm; H1:169.875 mm; H2:66.675 mm; J min.:441.325 mm; J max.:488.95 mm; J1:95.25 mm; L:558.8 mm; N1:28.575 mm; R1:104.775 mm; R2:33.337 mm; RG:3/4 NPT; PG:1/4 NPT; h:52.388 mm; Housing:SAF 036 KA; Stabilizing ring:2 x 38151-36; Labyrinth ring:2 x LOR 146; PosiTrac Plus contact element:2 x B10724-148; End plug (suffix Y):EPR 19; Max. speed for PosiTrac Plus seal:875 r/min; P60°:226 kN; P90°:136 kN; P120°:85.9 kN; P150°:78.3 kN; P180°:94.3 kN; Pa:40 kN; Mass pillow block:94.8 kg; Cap bolt:4 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:1 in; Initial grease fill:793.8 g; |
| QM INDUSTRIES QVVTU22V311SEM Take Up Unit Bearings | da:165.1 mm; Da:279.999 mm; Ca:102.794 mm; A1:158.75 mm; A2:222.25 mm; ba:68.263 mm; H:336.55 mm; H1:169.875 mm; H2:66.675 mm; J min.:441.325 mm; J max.:488.95 mm; J1:95.25 mm; L:558.8 mm; N1:28.575 mm; R1:104.775 mm; R2:33.337 mm; RG:3/4 NPT; PG:1/4 NPT; h:52.388 mm; Housing:SAF 036 KA; Stabilizing ring:2 x 38151-36; Labyrinth ring:2 x LOR 146; PosiTrac Plus contact element:2 x B10724-148; End plug (suffix Y):EPR 19; Max. speed for PosiTrac Plus seal:875 r/min; P60°:226 kN; P90°:136 kN; P120°:85.9 kN; P150°:78.3 kN; P180°:94.3 kN; Pa:40 kN; Mass pillow block:94.8 kg; Cap bolt:4 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:1 in; Initial grease fill:793.8 g; |
| QM INDUSTRIES QVVTU22V100SEO Take Up Unit Bearings | da:165.1 mm; Da:279.999 mm; Ca:102.794 mm; A1:158.75 mm; A2:222.25 mm; ba:68.263 mm; H:336.55 mm; H1:169.875 mm; H2:66.675 mm; J min.:441.325 mm; J max.:488.95 mm; J1:95.25 mm; L:558.8 mm; N1:28.575 mm; R1:104.775 mm; R2:33.337 mm; RG:3/4 NPT; PG:1/4 NPT; h:52.388 mm; Housing:SAF 036 KA; Stabilizing ring:2 x 38151-36; Labyrinth ring:2 x LOR 146; PosiTrac Plus contact element:2 x B10724-148; End plug (suffix Y):EPR 19; Max. speed for PosiTrac Plus seal:875 r/min; P60°:226 kN; P90°:136 kN; P120°:85.9 kN; P150°:78.3 kN; P180°:94.3 kN; Pa:40 kN; Mass pillow block:94.8 kg; Cap bolt:4 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:1 in; Initial grease fill:793.8 g; |
| QM INDUSTRIES QMTU10J115SET Take Up Unit Bearings | da:165.1 mm; Da:279.999 mm; Ca:102.794 mm; A1:158.75 mm; A2:222.25 mm; ba:68.263 mm; H:336.55 mm; H1:169.875 mm; H2:66.675 mm; J min.:441.325 mm; J max.:488.95 mm; J1:95.25 mm; L:558.8 mm; N1:28.575 mm; R1:104.775 mm; R2:33.337 mm; RG:3/4 NPT; PG:1/4 NPT; h:52.388 mm; Housing:SAF 036 KA; Stabilizing ring:2 x 38151-36; Labyrinth ring:2 x LOR 146; PosiTrac Plus contact element:2 x B10724-148; End plug (suffix Y):EPR 19; Max. speed for PosiTrac Plus seal:875 r/min; P60°:226 kN; P90°:136 kN; P120°:85.9 kN; P150°:78.3 kN; P180°:94.3 kN; Pa:40 kN; Mass pillow block:94.8 kg; Cap bolt:4 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:1 in; Initial grease fill:793.8 g; |
| QM INDUSTRIES QMTU10J050SC Take Up Unit Bearings | da:165.1 mm; Da:279.999 mm; Ca:102.794 mm; A1:158.75 mm; A2:222.25 mm; ba:68.263 mm; H:336.55 mm; H1:169.875 mm; H2:66.675 mm; J min.:441.325 mm; J max.:488.95 mm; J1:95.25 mm; L:558.8 mm; N1:28.575 mm; R1:104.775 mm; R2:33.337 mm; RG:3/4 NPT; PG:1/4 NPT; h:52.388 mm; Housing:SAF 036 KA; Stabilizing ring:2 x 38151-36; Labyrinth ring:2 x LOR 146; PosiTrac Plus contact element:2 x B10724-148; End plug (suffix Y):EPR 19; Max. speed for PosiTrac Plus seal:875 r/min; P60°:226 kN; P90°:136 kN; P120°:85.9 kN; P150°:78.3 kN; P180°:94.3 kN; Pa:40 kN; Mass pillow block:94.8 kg; Cap bolt:4 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:1 in; Initial grease fill:793.8 g; |
| QM INDUSTRIES QVVTU19V308SM Take Up Unit Bearings | da:165.1 mm; Da:279.999 mm; Ca:102.794 mm; A1:158.75 mm; A2:222.25 mm; ba:68.263 mm; H:336.55 mm; H1:169.875 mm; H2:66.675 mm; J min.:441.325 mm; J max.:488.95 mm; J1:95.25 mm; L:558.8 mm; N1:28.575 mm; R1:104.775 mm; R2:33.337 mm; RG:3/4 NPT; PG:1/4 NPT; h:52.388 mm; Housing:SAF 036 KA; Stabilizing ring:2 x 38151-36; Labyrinth ring:2 x LOR 146; PosiTrac Plus contact element:2 x B10724-148; End plug (suffix Y):EPR 19; Max. speed for PosiTrac Plus seal:875 r/min; P60°:226 kN; P90°:136 kN; P120°:85.9 kN; P150°:78.3 kN; P180°:94.3 kN; Pa:40 kN; Mass pillow block:94.8 kg; Cap bolt:4 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:1 in; Initial grease fill:793.8 g; |
| QM INDUSTRIES QAATU18A304SEN Take Up Unit Bearings | da:165.1 mm; Da:279.999 mm; Ca:102.794 mm; A1:158.75 mm; A2:222.25 mm; ba:68.263 mm; H:336.55 mm; H1:169.875 mm; H2:66.675 mm; J min.:441.325 mm; J max.:488.95 mm; J1:95.25 mm; L:558.8 mm; N1:28.575 mm; R1:104.775 mm; R2:33.337 mm; RG:3/4 NPT; PG:1/4 NPT; h:52.388 mm; Housing:SAF 036 KA; Stabilizing ring:2 x 38151-36; Labyrinth ring:2 x LOR 146; PosiTrac Plus contact element:2 x B10724-148; End plug (suffix Y):EPR 19; Max. speed for PosiTrac Plus seal:875 r/min; P60°:226 kN; P90°:136 kN; P120°:85.9 kN; P150°:78.3 kN; P180°:94.3 kN; Pa:40 kN; Mass pillow block:94.8 kg; Cap bolt:4 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:1 in; Initial grease fill:793.8 g; |
| QM INDUSTRIES QVVTU22V311SEN Take Up Unit Bearings | da:165.1 mm; Da:279.999 mm; Ca:102.794 mm; A1:158.75 mm; A2:222.25 mm; ba:68.263 mm; H:336.55 mm; H1:169.875 mm; H2:66.675 mm; J min.:441.325 mm; J max.:488.95 mm; J1:95.25 mm; L:558.8 mm; N1:28.575 mm; R1:104.775 mm; R2:33.337 mm; RG:3/4 NPT; PG:1/4 NPT; h:52.388 mm; Housing:SAF 036 KA; Stabilizing ring:2 x 38151-36; Labyrinth ring:2 x LOR 146; PosiTrac Plus contact element:2 x B10724-148; End plug (suffix Y):EPR 19; Max. speed for PosiTrac Plus seal:875 r/min; P60°:226 kN; P90°:136 kN; P120°:85.9 kN; P150°:78.3 kN; P180°:94.3 kN; Pa:40 kN; Mass pillow block:94.8 kg; Cap bolt:4 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:1 in; Initial grease fill:793.8 g; |
| QM INDUSTRIES QVVTU22V100SEC Take Up Unit Bearings | da:165.1 mm; Da:279.999 mm; Ca:102.794 mm; A1:158.75 mm; A2:222.25 mm; ba:68.263 mm; H:336.55 mm; H1:169.875 mm; H2:66.675 mm; J min.:441.325 mm; J max.:488.95 mm; J1:95.25 mm; L:558.8 mm; N1:28.575 mm; R1:104.775 mm; R2:33.337 mm; RG:3/4 NPT; PG:1/4 NPT; h:52.388 mm; Housing:SAF 036 KA; Stabilizing ring:2 x 38151-36; Labyrinth ring:2 x LOR 146; PosiTrac Plus contact element:2 x B10724-148; End plug (suffix Y):EPR 19; Max. speed for PosiTrac Plus seal:875 r/min; P60°:226 kN; P90°:136 kN; P120°:85.9 kN; P150°:78.3 kN; P180°:94.3 kN; Pa:40 kN; Mass pillow block:94.8 kg; Cap bolt:4 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:1 in; Initial grease fill:793.8 g; |
| QM INDUSTRIES QMTU10J200SN Take Up Unit Bearings | da:165.1 mm; Da:279.999 mm; Ca:102.794 mm; A1:158.75 mm; A2:222.25 mm; ba:68.263 mm; H:336.55 mm; H1:169.875 mm; H2:66.675 mm; J min.:441.325 mm; J max.:488.95 mm; J1:95.25 mm; L:558.8 mm; N1:28.575 mm; R1:104.775 mm; R2:33.337 mm; RG:3/4 NPT; PG:1/4 NPT; h:52.388 mm; Housing:SAF 036 KA; Stabilizing ring:2 x 38151-36; Labyrinth ring:2 x LOR 146; PosiTrac Plus contact element:2 x B10724-148; End plug (suffix Y):EPR 19; Max. speed for PosiTrac Plus seal:875 r/min; P60°:226 kN; P90°:136 kN; P120°:85.9 kN; P150°:78.3 kN; P180°:94.3 kN; Pa:40 kN; Mass pillow block:94.8 kg; Cap bolt:4 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:1 in; Initial grease fill:793.8 g; |
| QM INDUSTRIES QAATU18A304SO Take Up Unit Bearings | da:165.1 mm; Da:279.999 mm; Ca:102.794 mm; A1:158.75 mm; A2:222.25 mm; ba:68.263 mm; H:336.55 mm; H1:169.875 mm; H2:66.675 mm; J min.:441.325 mm; J max.:488.95 mm; J1:95.25 mm; L:558.8 mm; N1:28.575 mm; R1:104.775 mm; R2:33.337 mm; RG:3/4 NPT; PG:1/4 NPT; h:52.388 mm; Housing:SAF 036 KA; Stabilizing ring:2 x 38151-36; Labyrinth ring:2 x LOR 146; PosiTrac Plus contact element:2 x B10724-148; End plug (suffix Y):EPR 19; Max. speed for PosiTrac Plus seal:875 r/min; P60°:226 kN; P90°:136 kN; P120°:85.9 kN; P150°:78.3 kN; P180°:94.3 kN; Pa:40 kN; Mass pillow block:94.8 kg; Cap bolt:4 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:1 in; Initial grease fill:793.8 g; |
| QM INDUSTRIES QMTU10J050SEC Take Up Unit Bearings | da:165.1 mm; Da:279.999 mm; Ca:102.794 mm; A1:158.75 mm; A2:222.25 mm; ba:68.263 mm; H:336.55 mm; H1:169.875 mm; H2:66.675 mm; J min.:441.325 mm; J max.:488.95 mm; J1:95.25 mm; L:558.8 mm; N1:28.575 mm; R1:104.775 mm; R2:33.337 mm; RG:3/4 NPT; PG:1/4 NPT; h:52.388 mm; Housing:SAF 036 KA; Stabilizing ring:2 x 38151-36; Labyrinth ring:2 x LOR 146; PosiTrac Plus contact element:2 x B10724-148; End plug (suffix Y):EPR 19; Max. speed for PosiTrac Plus seal:875 r/min; P60°:226 kN; P90°:136 kN; P120°:85.9 kN; P150°:78.3 kN; P180°:94.3 kN; Pa:40 kN; Mass pillow block:94.8 kg; Cap bolt:4 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 3/8-16 UNC; Appropriate attachment bolt size G:1 in; Initial grease fill:793.8 g; |