Together REXNORD ZGT11540010 Take Up Unit Bearings Application | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | d | Noun | UNSPSC | Weight | Inventory | Slot Width | Weight / LBS | Housing Style |
ZGT11540010 | REXNORD | 4 Inch | 101.6 Millimeter | Bearing | 31171533 | 95.34 | 0.0 | 0 Inch | 0 Millimeter | 210 | Center Pull Vertical Elevator Head End |
QM INDUSTRIES QAATU18A304SO Take Up Unit Bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; L:349.25 mm; N1:23.813 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAFS 218; Stabilizing ring:SR-18-15; Taconite seal (db shaft position):TER 112; Taconite seal (dc shaft position):TER 191; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:750 r/min; P60°:141 kN; P90°:84.5 kN; P120°:53.4 kN; P150°:48 kN; P180°:58.7 kN; Pa:37.8 kN; Mass pillow block:29.5 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
QM INDUSTRIES QMTU10J050SC Take Up Unit Bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; L:349.25 mm; N1:23.813 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAFS 218; Stabilizing ring:SR-18-15; Taconite seal (db shaft position):TER 112; Taconite seal (dc shaft position):TER 191; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:750 r/min; P60°:141 kN; P90°:84.5 kN; P120°:53.4 kN; P150°:48 kN; P180°:58.7 kN; Pa:37.8 kN; Mass pillow block:29.5 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
QM INDUSTRIES QVVTU22V311SEN Take Up Unit Bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; L:349.25 mm; N1:23.813 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAFS 218; Stabilizing ring:SR-18-15; Taconite seal (db shaft position):TER 112; Taconite seal (dc shaft position):TER 191; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:750 r/min; P60°:141 kN; P90°:84.5 kN; P120°:53.4 kN; P150°:48 kN; P180°:58.7 kN; Pa:37.8 kN; Mass pillow block:29.5 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
QM INDUSTRIES QMTU10J050SEC Take Up Unit Bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; L:349.25 mm; N1:23.813 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAFS 218; Stabilizing ring:SR-18-15; Taconite seal (db shaft position):TER 112; Taconite seal (dc shaft position):TER 191; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:750 r/min; P60°:141 kN; P90°:84.5 kN; P120°:53.4 kN; P150°:48 kN; P180°:58.7 kN; Pa:37.8 kN; Mass pillow block:29.5 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
QM INDUSTRIES QMTU10J200SN Take Up Unit Bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; L:349.25 mm; N1:23.813 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAFS 218; Stabilizing ring:SR-18-15; Taconite seal (db shaft position):TER 112; Taconite seal (dc shaft position):TER 191; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:750 r/min; P60°:141 kN; P90°:84.5 kN; P120°:53.4 kN; P150°:48 kN; P180°:58.7 kN; Pa:37.8 kN; Mass pillow block:29.5 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
QM INDUSTRIES QVVTU22V100SO Take Up Unit Bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; L:349.25 mm; N1:23.813 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAFS 218; Stabilizing ring:SR-18-15; Taconite seal (db shaft position):TER 112; Taconite seal (dc shaft position):TER 191; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:750 r/min; P60°:141 kN; P90°:84.5 kN; P120°:53.4 kN; P150°:48 kN; P180°:58.7 kN; Pa:37.8 kN; Mass pillow block:29.5 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
QM INDUSTRIES QVVTU22V100SEO Take Up Unit Bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; L:349.25 mm; N1:23.813 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAFS 218; Stabilizing ring:SR-18-15; Taconite seal (db shaft position):TER 112; Taconite seal (dc shaft position):TER 191; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:750 r/min; P60°:141 kN; P90°:84.5 kN; P120°:53.4 kN; P150°:48 kN; P180°:58.7 kN; Pa:37.8 kN; Mass pillow block:29.5 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
QM INDUSTRIES QVVTU19V308SM Take Up Unit Bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; L:349.25 mm; N1:23.813 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAFS 218; Stabilizing ring:SR-18-15; Taconite seal (db shaft position):TER 112; Taconite seal (dc shaft position):TER 191; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:750 r/min; P60°:141 kN; P90°:84.5 kN; P120°:53.4 kN; P150°:48 kN; P180°:58.7 kN; Pa:37.8 kN; Mass pillow block:29.5 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
QM INDUSTRIES QAATU18A304SEN Take Up Unit Bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; L:349.25 mm; N1:23.813 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAFS 218; Stabilizing ring:SR-18-15; Taconite seal (db shaft position):TER 112; Taconite seal (dc shaft position):TER 191; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:750 r/min; P60°:141 kN; P90°:84.5 kN; P120°:53.4 kN; P150°:48 kN; P180°:58.7 kN; Pa:37.8 kN; Mass pillow block:29.5 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
QM INDUSTRIES QVVTU22V311SEM Take Up Unit Bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; L:349.25 mm; N1:23.813 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAFS 218; Stabilizing ring:SR-18-15; Taconite seal (db shaft position):TER 112; Taconite seal (dc shaft position):TER 191; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:750 r/min; P60°:141 kN; P90°:84.5 kN; P120°:53.4 kN; P150°:48 kN; P180°:58.7 kN; Pa:37.8 kN; Mass pillow block:29.5 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
QM INDUSTRIES QMTU10J115SET Take Up Unit Bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; L:349.25 mm; N1:23.813 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAFS 218; Stabilizing ring:SR-18-15; Taconite seal (db shaft position):TER 112; Taconite seal (dc shaft position):TER 191; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:750 r/min; P60°:141 kN; P90°:84.5 kN; P120°:53.4 kN; P150°:48 kN; P180°:58.7 kN; Pa:37.8 kN; Mass pillow block:29.5 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
QM INDUSTRIES QVVTU22V100SEC Take Up Unit Bearings | da:90 mm; db:104.775 mm; dc:85.725 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; S:4.763 mm; ba:40.481 mm; H:196.85 mm; H1:101.6 mm; H2:41.275 mm; J min.:263.525 mm; J max.:295.275 mm; L:349.25 mm; N1:23.813 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAFS 218; Stabilizing ring:SR-18-15; Taconite seal (db shaft position):TER 112; Taconite seal (dc shaft position):TER 191; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:750 r/min; P60°:141 kN; P90°:84.5 kN; P120°:53.4 kN; P150°:48 kN; P180°:58.7 kN; Pa:37.8 kN; Mass pillow block:29.5 kg; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
REXNORD ZGT11540010 Take Up Unit Bearings Video