Together REXNORD MT95215 Take Up Unit Bearings Application |
|---|
| No. | Brand | d | Noun | UNSPSC | Weight | Inventory | Slot Width | Weight / LBS | Housing Style |
| MGT952157 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 45.4 | 0.0 | 0 Inch | 0 Millimeter | 100 | Center Pull Vertical Elevator Head End |
| MHT9521512 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 58.112 | 0.0 | 0 Inch | 0 Millimeter | 128 | Center Pull Vertical |
| MHT9521524 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 72.186 | 0.0 | 0 Inch | 0 Millimeter | 159 | Center Pull Vertical |
| MHT9521536 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 86.71 | 0.0 | 0 Inch | 0 Millimeter | 191 | Center Pull Vertical |
| MHT9521518 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 64.468 | 0.0 | 0 Inch | 0 Millimeter | 142 | Center Pull Vertical |
| MHT9521530 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 79 | 0.0 | 0 Inch | 0 Millimeter | 174 | Center Pull Vertical |
| ZST9521518 | REXNORD | - | - | - | 81.72 | 0.0 | - | - | - |
| ZNT9521524 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 52.21 | 0.0 | 0 Inch | 0 Millimeter | 115 | Top Angle |
| ZNT9521518 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 55.388 | 0.0 | 0 Inch | 0 Millimeter | 95 | Top Angle |
| ZFT9521512 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 51.756 | 0.0 | 0 Inch | 0 Millimeter | 114 | Center Pull Horizontal Elevator Boot End |
| ZGT952157 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 45.4 | 0.0 | 0 Inch | 0 Millimeter | 100 | Center Pull Vertical Elevator Head End |
| QM INDUSTRIES QAATU18A304SEN Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
| QM INDUSTRIES QAATU18A304SO Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
| QM INDUSTRIES QMTU10J050SC Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
| QM INDUSTRIES QVVTU22V311SEN Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
| QM INDUSTRIES QMTU10J200SN Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
| QM INDUSTRIES QVVTU22V311SEM Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
| QM INDUSTRIES QVVTU22V100SEO Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
| QM INDUSTRIES QVVTU19V308SM Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
| QM INDUSTRIES QVVTU22V100SEC Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
| QM INDUSTRIES QVVTU22V100SO Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
| QM INDUSTRIES QMTU10J050SEC Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
| QM INDUSTRIES QMTU10J115SET Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |