| QM INDUSTRIES QAATU18A304SEN Take Up Unit Bearings | da:63.5 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; ba:30.163 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:31.75 mm; Housing:FSAF 515; Stabilizing ring:2 x SR-15-0; Labyrinth ring:2 x LOR 38; End plug (suffix Y):EPR 7; Bearing limiting speed:6700 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:5.65 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:136.08 g; |
| QM INDUSTRIES QMTU10J115SET Take Up Unit Bearings | da:63.5 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; ba:30.163 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:31.75 mm; Housing:FSAF 515; Stabilizing ring:2 x SR-15-0; Labyrinth ring:2 x LOR 38; End plug (suffix Y):EPR 7; Bearing limiting speed:6700 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:5.65 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:136.08 g; |
| QM INDUSTRIES QVVTU19V308SM Take Up Unit Bearings | da:63.5 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; ba:30.163 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:31.75 mm; Housing:FSAF 515; Stabilizing ring:2 x SR-15-0; Labyrinth ring:2 x LOR 38; End plug (suffix Y):EPR 7; Bearing limiting speed:6700 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:5.65 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:136.08 g; |
| QM INDUSTRIES QVVTU22V100SO Take Up Unit Bearings | da:63.5 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; ba:30.163 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:31.75 mm; Housing:FSAF 515; Stabilizing ring:2 x SR-15-0; Labyrinth ring:2 x LOR 38; End plug (suffix Y):EPR 7; Bearing limiting speed:6700 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:5.65 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:136.08 g; |
| QM INDUSTRIES QVVTU22V311SEM Take Up Unit Bearings | da:63.5 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; ba:30.163 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:31.75 mm; Housing:FSAF 515; Stabilizing ring:2 x SR-15-0; Labyrinth ring:2 x LOR 38; End plug (suffix Y):EPR 7; Bearing limiting speed:6700 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:5.65 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:136.08 g; |
| QM INDUSTRIES QMTU10J200SN Take Up Unit Bearings | da:63.5 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; ba:30.163 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:31.75 mm; Housing:FSAF 515; Stabilizing ring:2 x SR-15-0; Labyrinth ring:2 x LOR 38; End plug (suffix Y):EPR 7; Bearing limiting speed:6700 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:5.65 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:136.08 g; |
| QM INDUSTRIES QAATU18A304SO Take Up Unit Bearings | da:63.5 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; ba:30.163 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:31.75 mm; Housing:FSAF 515; Stabilizing ring:2 x SR-15-0; Labyrinth ring:2 x LOR 38; End plug (suffix Y):EPR 7; Bearing limiting speed:6700 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:5.65 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:136.08 g; |
| QM INDUSTRIES QVVTU22V311SEN Take Up Unit Bearings | da:63.5 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; ba:30.163 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:31.75 mm; Housing:FSAF 515; Stabilizing ring:2 x SR-15-0; Labyrinth ring:2 x LOR 38; End plug (suffix Y):EPR 7; Bearing limiting speed:6700 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:5.65 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:136.08 g; |
| QM INDUSTRIES QVVTU22V100SEO Take Up Unit Bearings | da:63.5 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; ba:30.163 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:31.75 mm; Housing:FSAF 515; Stabilizing ring:2 x SR-15-0; Labyrinth ring:2 x LOR 38; End plug (suffix Y):EPR 7; Bearing limiting speed:6700 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:5.65 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:136.08 g; |
| QM INDUSTRIES QMTU10J050SEC Take Up Unit Bearings | da:63.5 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; ba:30.163 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:31.75 mm; Housing:FSAF 515; Stabilizing ring:2 x SR-15-0; Labyrinth ring:2 x LOR 38; End plug (suffix Y):EPR 7; Bearing limiting speed:6700 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:5.65 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:136.08 g; |
| QM INDUSTRIES QVVTU22V100SEC Take Up Unit Bearings | da:63.5 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; ba:30.163 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:31.75 mm; Housing:FSAF 515; Stabilizing ring:2 x SR-15-0; Labyrinth ring:2 x LOR 38; End plug (suffix Y):EPR 7; Bearing limiting speed:6700 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:5.65 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:136.08 g; |
| QM INDUSTRIES QMTU10J050SC Take Up Unit Bearings | da:63.5 mm; Da:130 mm; Ca:37.008 mm; A1:79.375 mm; A2:118.666 mm; ba:30.163 mm; H:157.559 mm; H1:82.55 mm; H2:28.575 mm; J min.:219.075 mm; J max.:244.475 mm; J1:47.625 mm; L:285.75 mm; N1:15.875 mm; R1:46.038 mm; R2:21.431 mm; RG:1/4 NPT; PG:1/8 NPT; h:31.75 mm; Housing:FSAF 515; Stabilizing ring:2 x SR-15-0; Labyrinth ring:2 x LOR 38; End plug (suffix Y):EPR 7; Bearing limiting speed:6700 r/min; P60°:54.3 kN; P90°:32.5 kN; P120°:20 kN; P150°:18.2 kN; P180°:22.2 kN; Pa:5.65 kN; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:81.3 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.5 in; Initial grease fill:136.08 g; |